| tank 1600i :: Vorderer Bremskreislauf baut keinen Druck auf | 
	 
	
		| Autor | Nachricht | 
		 
		| ed8widge 
 
 
 Anmeldungsdatum: 16.04.2009
 Beiträge: 3
 
 
 | 
			
				|  Verfasst am: 17 Sep 2009 12:15    Titel: Iddling Throttle unstable with  my 1600 |   |   
				| 
 |  
				| [b]Hi guys .I have  a  1600i engine .For  6 months I am trying  to fix  a  throttle problem with the  car and  i cannot  find  solutions please  HELP. The  engine is unstable  runs  up to 1000 round  per minute and  them quickly slow down to 800 and back to 1000 rpm again in a second .Happens when I   turn  AC on. This  is  what I have  done  on it so far: I have changed  the  iddling valve (new)
 I have switched the computer module
 I have Changed  battery
 I have changed the tps (new)
 reviewed  the  all electric  system include alternator
 not  a bit of  hope , no amelioration , if  you have  any  idea what may be  the  cause  please post it . I am desperate
 
 
 
 Zuletzt bearbeitet von ed8widge am 24 Sep 2009 3:20, insgesamt einmal bearbeitet
 |  | 
	 
		| Nach oben |  | 
		 
		| Rafael 
 
  
 Anmeldungsdatum: 17.10.2007
 Beiträge: 53
 Wohnort: Versmold
 
 |  | 
	 
		| Nach oben |  | 
		 
		| phade 
 
  
 Anmeldungsdatum: 14.09.2007
 Beiträge: 235
 Wohnort: Kent / Süd-Ost London - (Kent / South East London)
 
 | 
			
				|  Verfasst am: 17 Sep 2009 12:40    Titel: |   |   
				| 
 |  
				| Hi ed8widge, 
 Do you have a VAG 1551/1552, VAS 5051/5052/5053 or a laptop running VAG-COM with the VAG-COM cable ?
 
 Without that, erasing faults from the fault memory let alone putting the ECU into basic settings mode would be impossible.
 
 When you changed the ECU, have you put the ECU into basic mode settings whilst the engine is running at idle speed ?
 
 Also, which version of the ECU is it ?  The D and E versions of the ECU sometimes rev the engine up and down to reduce emissions at idle speed.
 
 Another thing to check for (I spotted this on my car) are cracked vacuum pipes.  One of the vacuum pipes was so brittle it literally snapped into small bits as soon as I touched it !!
 
 Good luck with getting your car to run properly.
 
 Cheers,
 
 Phil
 
 
 |  | 
	 
		| Nach oben |  | 
		 
		| ed8widge 
 
 
 Anmeldungsdatum: 16.04.2009
 Beiträge: 3
 
 
 | 
			
				|  Verfasst am: 24 Sep 2009 3:15    Titel: thanks for answering |   |   
				| 
 |  
				| thanks to you both , i will try all and let you know the results after 
 
 |  | 
	 
		| Nach oben |  | 
	
  |  | 
	 
		|  |