Das Forum von www.k-ue.de und www.1600i.de
Login Registrieren FAQ Mitgliederliste Suchen Das Forum von www.k-ue.de und www.1600i.de Foren-Übersicht

Iddling Throttle unstable with my 1600

 
Neues Thema eröffnen   Neue Antwort erstellen    Das Forum von www.k-ue.de und www.1600i.de Foren-Übersicht » Technique - Technik
tank 1600i :: Vorderer Bremskreislauf baut keinen Druck auf  
Autor Nachricht
ed8widge



Anmeldungsdatum: 16.04.2009
Beiträge: 3

BeitragVerfasst am: 17 Sep 2009 12:15    Titel: Iddling Throttle unstable with my 1600 Antworten mit Zitat

[b]Hi guys .I have a 1600i engine .For 6 months I am trying to fix a throttle problem with the car and i cannot find solutions please HELP. The engine is unstable runs up to 1000 round per minute and them quickly slow down to 800 and back to 1000 rpm again in a second .Happens when I turn AC on. This is what I have done on it so far:
I have changed the iddling valve (new)
I have switched the computer module
I have Changed battery
I have changed the tps (new)
reviewed the all electric system include alternator
not a bit of hope , no amelioration , if you have any idea what may be the cause please post it . I am desperate




Zuletzt bearbeitet von ed8widge am 24 Sep 2009 3:20, insgesamt einmal bearbeitet
Nach oben
Rafael



Anmeldungsdatum: 17.10.2007
Beiträge: 53
Wohnort: Versmold

BeitragVerfasst am: 17 Sep 2009 12:31    Titel: Antworten mit Zitat

Hi "ed8widge",

did you replaced the "ECU" relay also? Note the following link!

http://www.1600i.de/1600i-elektronik/relais-steuergeraet/CheckingandrepairingtheECUrelay.htm

Good luck!

Rafael



_________________
1600i Registereintrag : 324
Nach oben
phade



Anmeldungsdatum: 14.09.2007
Beiträge: 235
Wohnort: Kent / Süd-Ost London - (Kent / South East London)

BeitragVerfasst am: 17 Sep 2009 12:40    Titel: Antworten mit Zitat

Hi ed8widge,

Do you have a VAG 1551/1552, VAS 5051/5052/5053 or a laptop running VAG-COM with the VAG-COM cable ?

Without that, erasing faults from the fault memory let alone putting the ECU into basic settings mode would be impossible.

When you changed the ECU, have you put the ECU into basic mode settings whilst the engine is running at idle speed ?

Also, which version of the ECU is it ? The D and E versions of the ECU sometimes rev the engine up and down to reduce emissions at idle speed.

Another thing to check for (I spotted this on my car) are cracked vacuum pipes. One of the vacuum pipes was so brittle it literally snapped into small bits as soon as I touched it !!

Good luck with getting your car to run properly.

Cheers,

Phil


Nach oben
ed8widge



Anmeldungsdatum: 16.04.2009
Beiträge: 3

BeitragVerfasst am: 24 Sep 2009 3:15    Titel: thanks for answering Antworten mit Zitat

thanks to you both , i will try all and let you know the results after


Nach oben
Beiträge der letzten Zeit anzeigen:   
Neues Thema eröffnen   Neue Antwort erstellen    Das Forum von www.k-ue.de und www.1600i.de Foren-Übersicht » Technique - Technik Alle Zeiten sind GMT + 1 Stunde
Seite 1 von 1

 
Du kannst keine Beiträge in dieses Forum schreiben.
Du kannst auf Beiträge in diesem Forum nicht antworten.
Du kannst deine Beiträge in diesem Forum nicht bearbeiten.
Du kannst deine Beiträge in diesem Forum nicht löschen.
Du kannst an Umfragen in diesem Forum nicht mitmachen.
Du kannst Dateien in diesem Forum nicht posten
Du kannst Dateien in diesem Forum nicht herunterladen

Ähnliche Beiträge
Thema Autor Forum Antworten Verfasst am
Keine neuen Beiträge Throttle / accelerator cable lenghth thedishking Technique - Technik 1 21 Mai 2008 15:12 Letzten Beitrag anzeigen
Keine neuen Beiträge Reparaturleitfaden für 1600 i -Motor/... ACD51143 Technique - Technik 1 29 Aug 2009 9:40 Letzten Beitrag anzeigen
Keine neuen Beiträge Problem mit der Alarm von 1600 PingorochoMcFly Technique - Technik 1 30 Apr 2010 2:24 Letzten Beitrag anzeigen
Keine neuen Beiträge Leistungsverlust 96 Käfer 1600 Rocky Technique - Technik 9 06 Jun 2010 16:16 Letzten Beitrag anzeigen
Keine neuen Beiträge adjusting the throttle body with vag-com George Technique - Technik 3 31 Dez 2010 16:12 Letzten Beitrag anzeigen



(co) 2011 www.1600i.de
Hosted by 1600i.de


phpBB Template by Vjacheslav Trushkin