Original soft

[xbacax]

hello

could anybody please send me the original soft to the 1600i computer ?
please it's extremaly important to me

this is my mail
baca_69@interia.pl

I'll be very pleased.
Thanx
baca

_________________
http://www.polskajazda.pl/Samochody/Volkswagen/Garbus/11266

[Guido]

http://www.1600i.de/1600i.html

you can download the original (software for eprom) here.

[xbacax]

please show me where

_________________
http://www.polskajazda.pl/Samochody/Volkswagen/Garbus/11266

[Guido]

http://www.1600i.de/1600i-diagnose/steuergeraet/steuergeraet.html

Sorry for the bad link. I hope this is better.

[Doc]

rigth click on i.e. "043 906 022" and save as .......
http://www.1600i.de/1600i-diagnose/steuergeraet/steuergeraet.html
The are the org. codes for all 1600i ECU's

Hallo Guido,
du warst doch glatt schneller

_________________
Register Nr. 336

[xbacax]

Thank You so much

_________________
http://www.polskajazda.pl/Samochody/Volkswagen/Garbus/11266

[xbacax]

btw....

I needed that for my engine project with two VW Speedshop throttle bodies. There has been some problems with the AFR, and we wanted to compere with the original softwere.



Uploaded with ImageShack.us

the vaccum is taken from 1 and 3 cylinder.

could You tell me what is the vaccum in intake manifold in oryginal system ?

best wishes
baca

_________________
http://www.polskajazda.pl/Samochody/Volkswagen/Garbus/11266

[phade]

The vacuum ports on the 1600i setup are in the following locations:-

- 12V vacuum pump inside the ECU (via a short length of rubber hose going to the ECU's outer case)
- Fuel pressure regulator
- Two vacuum ports on the inlet manifold centre piece below the throttle body.